RZR Tie Downs

After doing some research, I decided to go with the GripPRO anchors to secure my new Clam Monster Box to my 2006 Polaris Sportsman. They worked fantastic and I couldn’t be happier. I laid the hole pattern out on a piece of cardboard, transferred the holes and perfect fit! Tighten the knobs down and now I have a super secure ice fishing box on my quad. In the spring, I just unscrew the knobs and remove the box until next winter. Fantastic product AND made in the USA. Ten stars!!

I use 6 of these to hold down my cooler and tool box in my rzr and they do a great job. Rode 100 miles over the weekend on rough terrain and they never came loose and held everything in place. I would highly recommend these for off/on road use

Worked great on my box

I used these to mount a Kimpex Nomad storage seat to my 2017 sportsman. I removed the rack, placed it underneath the kimpex seat and marked where my holes will be and then drilled the holes. Re installed the rack in the wheeler and then put two anchors in the rack and used them to secure it. Unfortunately only 2 of the lock n ride holes m lined up with rack, and I had to use 2 u bolts in the rear to the round tubing. Where these secure the rack it appears they are sturdy however there is a little bounce up and down in the storage seat. I may switch these out for bigger nuts and bolts with big washers since it’s a seat. I’m not sure these are the best for the nomad rack as there are handles and I’m afraid in rough situations they could pull it.

easy, quick and solid great product!

These tie downs work great at a fraction of the cost of factory ones. I used these on a custom box I fabricated.

Much cheaper alternative to the Polaris brand locking adapters. They fit perfectly with no issues.

Worked perfectly on ‘14 sportsman 570

Excelente producto buen sgarre

Have a 2012 Polaris Sportsman 550, both clips for my front storage box broke. Ordered these, worked perfect.

buen producto lo utilice para montar un asiento en una polaris sportman 570, quedo muy firme.

Storage for a wheeler is not cheap. But I got this box at Princess auto in Canada for $30.00. To add stability I bought a sheet of metal and drilled holes to match the anchor points of my CForce 600 touring 2 up four wheeler. Now the anchors are meant for Polaris that has a similar rack system, but their anchor holes are a smidget bigger then the cforce. So on the holes I was using I had to shave down the holes by like 1mm on each side. The anchors now fit in no problem and expand to hold everything in place. I now have a 60l storage box on my bike, it is so far kept all water and dust out and it cost me less then $100.00 to put together. These anchors were perfect, they fit perfect they expand and plug the holes perfect. great value.

Fit well