G276ARGB

Super easy install. Hardest part is keeping your slot covers in place. Looks great and feels nice and sturdy. Honestly overkill for my RTX5070 but it looks sweet.

It does what it's supposed to do. It's durable and sturdy, the LEDs are bright and look great.

I was worried it was going to look and feel cheap. Instead it feels super high quality and works exactly as expected. It bothered me that the card hung to the right a little bit and I read it could actually break the PCI ports. Its useful and looks good

Functionally, this support bracket offers moderately good support for my GPU. It is currently supporting a 6750 XT, which is not too heavy, but definitely very lengthy. It seems to be good build quality. In terms of installation, it is a bit of a pain and there are no obvious instructions in the packaging (this was the biggest downside). Aside from that, it is relatively good value for money and looks great.

Easy to install, the riser does its job, but it looks amazing while doing it's job. That little added splash of ARGB is exactly what my case need to help those last little bit of missing aesthetics. I love the fact that it came with a jumper connection so it could still interface with the ARGB controller I have installed. Clean and seamless control through SignalRGB.

Does exactly what it’s supposed to — no more GPU sag. The build quality feels solid, and the adjustable length and height make it easy to fit perfectly in my case. The built-in ARGB strip syncs nicely with my motherboard’s lighting for a clean, unified look. The installation was simple, and once in place, it feels rock-steady. Great mix of function and style.

They work great, they look great, no complaints. They do what they say they do and match the rest of my RGB build perfectly. Absolutely worth the money.

I bought this support to brace my 3-fan GPU in my King 95 Pro case, which has 3 fans integrated into the bottom of the case. It seemed like a good alternative to a post support. The good: simple design, nice RGB lighting with splitter cable, smaller screws than stock case screws to work with support bracket, 2 small foam pads to cushion the brace/GPU interface (see later). The less good: the brace sags vertically and sways laterally (this could be due to using only 2 of the 3 brace attachment screws, which were all that would fit my case/card combination). The two small foam pads shifted and came loose, and blew off the brace. I have found only one of them. I replaced them with a piece of electrical tape, which should be sufficient. In the end, I will keep the brace becasue I like the RGB and it is working well so far. However, I bought a post too. It fits between the bottom case fan and the motherboard - not ideal, but combined with the brace, I think it will be sufficient.

تركيبه صعب والمشكلة انه ضعيف ومع الوقت يرتخي مسمار التثبيت في على الكيس والي يشيل كرت الشاشة

I bought this GPU bracket hoping to properly support my RTX 5070 in my Lian Li Lancool II case. Unfortunately, the left side where it attaches to the case is too bulky, which forces me to mount it one row lower. Doing this makes the adjustable part too short to reach the GPU, so it doesn’t really serve its purpose. I had to drill extra holes in my case to make it fit. Also, I’ve lost access to the three PCI slots below the GPU. On the bright side, it’s colorful and has lights, so it looks nice. Overall, it’s functional if you’re willing to modify your case, but the design could be much better.

Calidad precio, los materiales se sienten de buena calidad y cumple su función, además de que el rgb se puede sincronizar con la iluminación rgb de la tarjeta madre.

Ich habe mir die upHere ARGB-GPU-Halterung geholt, um das Durchhängen der Grafikkarte zu verhindern – und genau dafür ist sie top. Die Halterung macht einen stabilen, wertigen Eindruck, lässt sich gut in der Höhe einstellen und die Montage war bei mir unkompliziert. Optisch ist das ARGB ein schöner Bonus und wertet den Innenraum zusätzlich auf. Wichtig: Ich hatte sie zunächst mit einer KFA2 GeForce RTX 5080 EX Gamer 1-Click OC im Einsatz – hier hat alles perfekt gepasst. Danach musste ich die Karte wegen eines Defekts tauschen und bin auf eine Gigabyte GeForce RTX 5080 Gaming OC gewechselt. In meinem Gehäuse (ENDORFY ARX 700 ARGB) passt die Halterung damit leider nicht mehr, weil die Grafikkarte bei mir zu viel Platz an den Slots einnimmt. Das ist aus meiner Sicht kein „Fehler“ der Halterung, sondern eine Frage von GPU-/Gehäuse-Kombination und Platzverhältnissen. Deshalb trotzdem 5 Sterne – die Halterung erfüllt ihren Zweck sehr gut, man sollte nur vorher kurz prüfen, ob neben der GPU genug Raum vorhanden ist.

Cumple perfectamente con su función, manteniendo la tarjeta gráfica completamente horizontal, descargando el peso de la placa base, dado el peso y tamaño de esta tarjeta. Tiene suficientes efectos lumínicos para elegir. Como m placa base es MSi, este soporte funciona perfectamente con Mystic Light, trabajando conjuntamente con otros periféricos RGB de MSi. La parte del soporte que es ajustable y toca directamente la gráfica me ha venido justo, ya que subir mas este soporte, solo un punto mas, interfería con los ventiladores ya que quedaba pegado a la tarjeta. Me ha quedado bastante bien y estoy satisfecho con la compra. Lo recomiendo. Es vistoso, pero las imágenes no le hacen justicia.