RackPath 12U Vertical Server Rack Rail Pair Kit, DIY Rack Build, 12-24 Screws x48

I was wanting to mount some studio equipment but not wanting yet another piece of furniture. I use a repurposed entertainment unit (remember those?) around my desk as it provides good shelf space within easy reach. The shelf width is close to the industry standard for equipment racks (19"). This item was the perfect way to make the conversion by supplying the rack functionality to an existing structure. I'm thinking that was the genius impetus that drove this into existence from the start. Because of its "do-it-yourself" nature however, care and at least some mechanical ability / accuracy of workmanship is necessary. If this does not describe you then perhaps enlisting the aid of one talented in these areas would be beneficial. The good: Low cost STURDY, heavy-gauge steel. Simple design, and comes with the hardware needed to install it to existing cabinetry while also providing the hardware to mount equipment to the finished rack (that was a huge bonus). The finished product looks fantastic and performs equally well. There really is no "bad", but I will say caveats: There is a saying, "measure twice, cut once". While there is probably no cutting involved, I would say, "Measure twice, then measure again". Remember learning fractions in school and wondering when you'd ever need it? Well, this is where you need it. If your existing spacing will not provide the 19" screw hole to screw hole (center on) spacing once these rails are installed, then one will need to add spacers or shims to get to that spacing. I painted mine flat black to disappear behind the rails. Also, the supplied hardware to mount it to a wood shelf unit may lack the robustness necessary for heavy equipment loads. If one needs to fill depth or shim for standard spacing, then longer hardware may be needed. Also, the parts are metric but most furniture in the U.S. is dimensioned in inches and fractions. This only seemed to matter when getting longer bolts to attach the racks. Finally, leave about a 1/2" or so gap from the bottom of your install to allow for cords or extended equipment fascia.

The racks are awesome they gave me many screws with it not tye good screws for the racks but they work I had to buy more of the good ones, but that was just a great freebie also you get all the mounting screws ! That was a beautiful thing! Great product

Seems to be working great, I'm using all 16 slots with some very heavy amps without issues. I've read other comments about the coating causing the holes to be unusable, that is true. I had to use the same size tap to redo all the holes; it was minimal effort, but time consuming.

The product quality is good and well made for the price. However, the 80 rail screws included, which is M6 type, doesn’t fit at all and hence the reason for 4 stars. Buyers, please be prepared to purchase the required qty of screws separately to avoid being disappointed later like I did. The screw type that fit this and other similar rails is M5. Bought a 50pk separately and they worked perfectly. Hoping the manufacturer is taking note from these reviews and rectify this problem.

Rails were straight and clean. The value here is the included rack *and* serious install hardware. It's just screws and washers, but I didn't have to go searching for them, or run to the store and spend $2 Two side notes: a) the rails are numbered at each space. You may care.; b) the "mfg box" is fine on its own for shipping one set. It's not flamboyant.

I don’t usually write reviews, but these things are terrible. The alignment of the screw holes was off between the pair of rails. The screws that came with the unit were poorly finished and almost impossible to get started, and once in strip easily. Several of the tap holes were mis-threaded. I’d like to think that they had a bad day, but I ordered 3 sets of these and they were pretty much all the same.

Easy to use and make an equipment rack fit your needs

These were used to modify a 2 post open frame wall mounted rack to a 4 post. I realize wall mounted racks aren't designed to hold considerable weight. But this rack is rated for 200 lbs. https://www.amazon.com/gp/product/B074NW3N1L/ I wanted sliding rails to hold a server chassis. So 2 additional posts were needed. I had to drill and tap. But overall was very simple to do. Excellent rail/posts.

They racks are good quality and would recommend these.

Los rieles se ven de calidad pero los tornillos incluidos no son de la rosca correcta así que no le sirven.

Perfect fit.

Con mucha alegría recibi estos rieles para instalarlos en los racks que me entrego el carpintero hasta ahi todo era alegria y felicidad los colocamos y eran exactamente lo que yo habia pedido pero me dió mucha Más alegría, ver que traia como 80 tornillos para sostener el equipo que pensaba colocar en los racks total se va el carpintero me dispongo a colocar el equipo y NI UNO DE LOS 80 tornillos funciono todos venían excedidos de tamaño, y da mucho coraje porque no pude terminar el trabajo pensando que esos tornillos iban a funcionar en conclusión los rieles de Metal son magníficos pero los accesorios incluidos no sirvieron para NADA.

Heavy duty rack rails with accurate holes and heavy metal gage. The paint job is well done as well as the marking