32 Pack- Brass Misting Nozzles For Outdoor Cooling System, 0.012” Orifice (0.3 mm) 10/24 UNC

I bought several packs of these and ended up using about 40 for my project. Out of those 40, only 1 head was faulty. Not too bad. I did an approximate 100 foot do-it-yourself PVC system. I used ½ PVC, incorporated valves, drain plugs, etc. As far as these spray heads are concerned, they worked perfectly. Very fine mist. I basically used the methodology I found on a youtube video, but turned it into a 100 foot system with all kinds of turns (search youtube for #3 Project 15/15 (Water Misting Tubes)). For these heads, use a 5/32 bit to drill your holes and then screw the heads in afterwards. The threads on the heads will create their own threading into the PVC and snug up great.. As for subsequently screwing in the heads in afterwards, it can be quite a pain to do by hand or even with pliers. But then I finally realized you can use your cordless drill and just wedge the head into the drill just like you would a drill bit. After realizing this, it was a breeze getting the spray heads into the PVC pipe. Btw, I tested my water pressure from the hose using a measureman water pressure test gauge (amazon) and my PSI is 70. I also used an Orbit 10109W mist calcium inhibitor filter (amazon) at the front of my system. All of the PVC and associated PVC adapters I got from home improvement stores. I got the brackets to hang all the PVC from the dollar tree. The brackets were actually fantastic as every other option I looked into was not going to work as well and be far more expensive. These come in a 5-pack for a $1, so cheapest part of the whole system. So for anyone interested, a 100-ft system, with lots of turns, using 1/2 “ PVC, with 70 PSI water pressure, and using about 40 of these heads with the drill hole and subsequent screw in method directly into the PVC, these work perfectly! In fact, I don’t even need to turn my water all the way up for maximum effectiveness. You could probably have lower PSI and have this work fine as well. Or use less heads or less overall distance if not. I’m very happy with this purchase, and I’m going to build a few custom PVC misting stands using these heads as a summer gift for family members.

They work good, nice even misting for plants. A must for raised beds

They work and fit great! only reason for 4 stars is I had 6 nozzles that did not work correctly was not a big deal as there was more than enough to swap out the ones that did not work right.

Used these to replace the ones I had for 3 years. Saved me from having to replace the entire system.

During the hot weather seasons we use these Brass Misting Nozzles during the day in our stalls and in our big tree. Our donkey, pig, goat and chickens can come into the stalls or rest under the big tree and be comfortable during the heat of the day. We turn the misters off after dark. The critters all love these misters!!

They work and easy to install!

Ordered prime 2 days...rec'd in 8 days....well after the party we were having where we wanted to repair the mister. These did work once received.

These worked great with my orbit misting system with booster pump great. Disbursement of mist.