FL25-tactical flashlight

A light on a home defense firearm that offers an easy to access/manipulate strobe function that can disorient & dissuade a potential home invader could be invaluable. For me the strobe function is of utmost importance and should be first in any sequence of light modes offered for a home defense light. Most lights have a long sequence of manipulations necessary to activate their strobe function. This light fits my needs very well as activating the strobe utilizing the remote switch is amazingly quick with just a quick double tap of the momentary switch. The light with the tail switch installed, believe it or not, is a little finicky and less straight forward to produce the strobe than the remote switch, at least on my light. Also, I cannot get low power on my steady state just high steady state and high strobe, which is perfect because that’s all I want in a weapons light. The light could use some modernization with battery replacement, not an issue with the tail switch installed, as the remote switch needs to be removed (unmounted) to unscrew the end cap to replace battery, if not the remote switch cord just starts kinking and will likely lead to a very short life expectancy for the remote switch. Removing the remote switch for battery replacement can be an endeavor depending on your mounting and cord management system. This light also has a long remote switch cord so cord management does become an issue. The light needs some type of 1/2 turn disconnect for both the tail switch and remote switch end cap for battery replacement. I still prefer battery replacement over the new magnetic connection charging option being offered on more and more products. The tightening knob on the picatinny mount, while convenient, needs to be replaced with the standard flush mount nut. Note that the light and mount are monolithic and not two separate items which I believe allows for a reduction in depth perpendicular to the picatinny, it works for me. I have three difference flashlights that operate with 18650 batteries that produce lots of lumens and this light is on par so no issue with the lights output. Overall my new favorite home defense firearm light as it is quick to strobe with enough lumens to light up the dark allowing for not only greater situational awareness but the effective use of red dot optics. Hope they make some improvements with the battery replacement, picatinny nut and chord length however, I still plan on picking up one maybe even two more. Quite happy with the light at a reasonable price point.

5.19.24 UPDATE: I have had my replacement for a bit now. The issue I had with the original looks to be a 1 off error when it's was manufactured. I have mounted it and it works as expected. I have gone through roughly 300 rounds, and it doesn't show any signs that it's a cheap WL. So far I can recommend it, the price is well worth the item you get. Unless you are going to war like half the clowns on Facebook, this WL will work just fine. If you like spending money, and think you are a Facebook soldier, then by all means purchase a 300 dollar light. Otherwise this one feels good I will update this review once Amazon sends me the replacement. I chose the FDE light. I really like that the Pic mount is part of the actual light housing. Less things to worry about rattling after use. My issue is that the pressure pad manufacturing process. Where the cable mounts to the pressure pad, there were exposed wires in the screw hole. This causes the light to flicker, even when turned off. I asked for a return/replacement because i really like the light for the price. If the 2nd one has the same issue, I will report back. I will remove this review and give my feedback if it's corrected. I don't believe in roasting a company because of a mistake. If 2 are bad in a row, it is not a mistake, it's a habit.

I'm actually really impressed with this product. I bought it just to test it out because I'm not ready to commit to a $200 light yet. The light is very bright, easy to install, and pretty durable. I did also purchase some Mlok rails to install it because the light is not Mlok. I read some negative reviews about the pressure switch when firing it'll switch modes but I believe that is just user error. I've figured out that if you just want normal light then click the button and don't use the plate because the pressure switch is sensitive to touch. I would for sure purchase this light again for cheap builds if ever needed. Also if you don't want the light to blow apart like other people in the reviews then keep it out of the way of the muzzle. Simple as that. most the reviews I've seen are user error. Also keep up with charging the batteries often so you don't risk having batteries not work. One last thing is make sure to take the pressure switch off it's mount before installing. Unscrew the pressure switch using a hex key then take the pressure switch mount, line it up with the slots in the rail, push it on there. It should snap right on the rail with no issues. After the mount is installed take the pressure switch and screw it back on. Make sure you organize the wire and strap it down to keep it out of the way, organized, and prevent a broken wire. Keep from wrapping the wire too tightly as well.

This flashlight feels solid, was easy to install, and has excellent build quality. The brightness is impressive, and the controls are simple and responsive. Overall, it's a dependable light that offers great value for the price.

Very nice bright when changing water out in the pasture or on a walk only thing bad is they don’t last as long when high beam is needed and takes a awhile to charge extra battery would be nice the durability seems to be good but only time will tell also fits in a pocket nice

Fantastic light pressure pad combo. Since it uses a standard 18650 the battery life is great. It has taken a few bbs drops and spills and still works like new. The pressure pad is both mlok and pic so mounting options for it are very versatile. For the money it’s great.

Super bright, and durable. Easy to use, just make sure you have some spare batteries and know that it will get super hot.

Cheap light

Very good build quality. Extremely bright. Comes with everything. Honestly impressed with the value.

To start this was really nicely packaged, cosmetically pleasing as well as protected and wrapped in foam. The light is very bright, functions well and changes modes quite easily. It is well built with an aluminum body and picatinny rail mount. The mount should transition to MLok very easy however I did not test it as Im using picatinny. The large thumb lock screw is awesome as its large enough to really torque the light on without being large enough to be intrusive or in the way. The strobe effect truly is disorienting and very bright as previously mentioned. The included oressure switch functions great and feels very robust. The picatinny rail mount for the pressure switch is made of thermal set plastic. It does feel strong and mounts securely however I am concerned for the long term longevity. I truly would have loved to have it in aluminum, however I do understand that some sacrifices need to be made for a tactical light of this build quality in the budget price range The battery charger and 2 18650 lithium batteries is a great addition as 1 battery can be on charge while the others is in the flashlight and in use. Battery charger seems pretty typical of a standard lithium charger, cheaply made plastic that will last for years if not abused. The 2 18650 batteries are both vented at the positive terminal for safety which I thought was a good feature. They Feyachi WL25 tactical flashlight is an incredibly well built light that I will not hesitate to recommend. If you are looking for a budget priced light this is the one. 5stars.

I have some 22 rifles that I want to have some sights and lights on and the product from Feyachi has been great value to get them setup. I have a red dot sight from them as well and it has been fantastic and this flashlight is no exception. The value and extra parts that are included as well as the overall fit and finish of the product are great both in value and quality.

the light itself is awesome. the pressure pad and strobe feature are super good too but the mount that attaches the light to the pic rail is trash because those tiny screws vibrate free. i ended up replacing it with a m-lock “scout mount” and now the light sits closer to the rifle and is sturdy

I finally installed and tested the tactical gun light and the light definitely has it's strange quirks - like how complicated it is to change modes. But the kicker is that after carefully mounting the pressure / tactile switch on the side ( to activate with the non-dominant hand ) the switch worked only a few times, then erratically, then not at all. The actual light also get really hot to the touch on high mode..burn hazard. I've seen and used much better lights with less quirky operation. The switch should be absolutely foolproof, as the flashlight is useless if you can't use it when you need it. I don't like it nor recommend it.