iLiving - 18" Wall Mounted Exhaust Fan - Automatic Shutter - Variable Speed - Vent Fan For Home Attic, Shed, or Garage Ventilation, 1736 CFM, 2600 SQF Coverage Area (Power Cord Not Included)

The Wall Mounted Shutter Exhaust Fan was incredibly easy to install, and I was able to get it up and running without much hassle. The clear instructions made the process straightforward, and the fan fit perfectly into the space. One thing to note, though, is that you’ll need to have an outlet nearby in the installation area, as it doesn’t come with a very long cord. I was fortunate to have an outlet within reach, but if you don’t, it’s something to plan for ahead of time. Once installed, the difference in my attic temperature was remarkable. Before, the attic was always unbearably hot, especially during the summer, but this fan has made a huge improvement. It helps circulate the air and keeps the attic at a much more manageable temperature, preventing that excessive heat buildup. I’ve noticed a significant drop in temperature, which has also helped reduce the strain on the house's AC system. Overall, this exhaust fan has been a great addition to the house. It was easy to install, works effectively, and has made a noticeable difference in the comfort and airflow of the attic. Highly recommended for anyone needing better ventilation in a hot space!

Works perfectly. Pretty quiet too. Using it for our airplane hangar.

This fan was easy to install and is working great in my shop. It helps to keep the most oppressive heat from building up. This summer in Texas has been especially hot. While it won’t cool it quite down to ambient, it makes a huge difference in the shop temperature. I’d say 8-12 degree difference. Your mileage will vary based on area size and conditions. I have a 30x40 shop with 14’ walls. I probably should have gone up to the next size but I’m happy with the noise level. It’s really not bad at all. The adjustable thermostat was a must for me as I didn’t want to run the fan nonstop or have to remember to turn it off.

We purchased the fan and Smart Thermostat (https://www.amazon.com/dp/B07NRG9RM5) in March 2020. The unit is installed as a gable fan at the hottest part of our attic. PROS: No failures, it just works...even the remote control. Up to this point, we've had to replace the remote batteries twice. Once the thermostat is set, the remote is primarily used to turn the unit on after a power outage, and to observe temp/humidity. Noise level is comparable to another 18in metal bladed fan we have with similar HP, but quieter than a 1/8HP, 18in fan = a nice motor choice by the manufacturer. CONS: Only one...no matter how I adjust the framing or lube the shutters, they still hang in a partially-open position. This began after 2-3 years of use. SUMMARY: If you need/want a louvered exhaust fan, look no further than this unit (in whatever size you choose). Other than the shutters being slightly frustrating, this is a very reliable and elegant looking solution that delivers excellent value for the price.

Super easy to install. Cut an 18x18 in the highest part of the gable wall. Sealed it in. Set the low on the thermometer. Plugged it in. Saw almost 30F drop in my attic temp. Lower temp. Less moisture. Super quiet.

Works great. Put it in my shop as an exhaust fan for my plasma table but with a recent heat wave the thermostat setting had been super handy. Fan runs at night and has the shop decently cool by morning.

Easy to install and works great.

I have purchased 2 of these items in last 2 months. This was an excellent purchase for removing hot air from my new Motorcycle enclosure. Thermostat is set and working perfectly. They have lowered the temp about 15-20 degrees. They are very quiet in the enclosure and can't hear thru the house wall. The design is very sturdy and should last several years.

Seems to be of good quality for something made in China. The 1/15 horsepower motor runs cool enough even in the hot barn. It also does a really good job of removing old stinky, humid air out of the barn. The chickens are healthyer now Im sure. Now it smells like farm in there, not just like poop! Another plus too is it used hardly any power at only 0.85 amps at full power.

The iLIVING 18" Exhaust Fan is an excellent upgrade for any garage, workshop, or greenhouse needing reliable ventilation. Installation was straightforward — just cut the opening, mount it flush, and wire it in. The automatic aluminum shutters open and close smoothly, keeping rain, dust, and pests out when the fan’s off. The motor is powerful but impressively quiet, moving a ton of air even on lower speeds. With the built-in thermostat and variable speed control, it automatically adjusts airflow as temperatures rise, which saves energy and keeps the space comfortable without constant tweaking. The build quality is solid — the housing feels durable, and the fan blades are well-balanced with no vibration. I’ve had it running daily in my garage for a few weeks, and it’s kept temperatures down dramatically. The variable control is a great feature — you can dial it down for gentle air movement or crank it up to clear fumes fast. If you’re looking for a reliable, efficient exhaust fan that’s easy to install and built to last, this is a fantastic choice. Perfect for workshops, barns, or any space that needs serious airflow.

Seems to be sturdy and professional looking. As others have mentioned, the louvers are quite finiky since they rely on gravity to close so don't close tightly on their own. A couple of strategically placed magnets seems to help. Mounting it flat and square is also very important to minimize binding of the louvers. This is easier said than done since most boards are not flat. It also does not include insect or varmint proofing. The cage around the fan is just for safety and a mouse could easily get through it into the attic so I built a custom "critter guard" and mounted it over the inside of the fan.

My greenhouse was reaching temperatures above 100F. I installed the fan and within 15 minutes, my greenhouse temperature dropped 10 degrees. I have it plugged into an Inkbird Temperature Controller and the combination have drastically improved growing conditons. I highly recommend this product.

Bien performant pour ma serre