VEVOR Adjustable Workbench, 2000 lbs Capacity, 61 x 20-inch Heavy Duty Work Bench with 27.1-36 Inches Height Adjustment, Garage Workbench with Power Outlets, Suitable for Office, Garage, Workshop

This is an excellent quality workbench. It is very heavy and sturdy. It is very nicely finished. The parts fit together perfectly, and assembly is easy. The top is solid oak, and very nicely finished. It comes with both adjustable feet and casters, which means it can be stationary or movable. It also has a very nice electrical socket panel, that includes USB ports. And it has steel pegboard incorporated into the leg panels, and include plenty of hangers. I am very impressed with this workbench, it is a great value for the price. I would definitely recommend it.

Beware of confusing bad reviews. It seems that the reviews for two different grades of workbenches are mixed together. This is the second one of this exact item I have bought. They are very well engineered with heavy duty frames and high quality fasteners. They went together without a single problem and are extremely sturdy. I recommend them highly. There is at least one other grade of workbench which is rated for 1500 pounds rather than 2000. I bought one of those and returned it without even completely unpacking it. BOTH are ordered from the same page on Amazon and the reviews for both are commingled. The 1500 was cracked along more then half the length of the top, which is thinner than the top of the 2000, when we opened the box. I think many of the complaints about this item, the 2000, are actually about the 1500. Look carefully at the photos on Amazon for both varieties and at the photos in the negative reviews and make sure the review is of the 2000. It's a few dollars more and worth every penny. Very satisfied owner.

Absolutely love this work bench. Very well built, quick assemble, strong wheels, large surface area. It does scratch a little easy but I normally cover my work benches with a cover anyways. Looks so clean in my garage, love it.

This turned out to be the perfect solution to a garage organization problem. I have a lot of the Craftsman stackable organizers, but when you unclip the various organizers there's no where to set them down except the floor. I removed my organizers from the rolling cart and slide them under this table. Now I have a work area to look through the various trays and additional work space. Table is a quality product and was easy to assemble. The braces appear to provide excellent reinforcement and it feels solid and not wobbly. Everything was included and it was nice to have a built in power strip to boot.

Table top dimensions - 48 x 23 1/2 in (122 x 60cm) Legs attach to front / back braces via bolts and grommets built into legs. Legs have 4 grommets for these connections but front and back brace are different. One has 4 holes to attach to the legs while the other only has 2. Attaching legs and braces to the table top is completed using provided wood screws and aligning to pre-drilled holes in the top. Legs have 3 pairs of 2 screws for total of 6 per leg. And front/back brace each use 5 screws to attach to the table top. Grommets and bolts to attach the table top would be preferable but as long as the table is not being moved much this should not be an issue. I ordered bench with adjustable feet as I wanted to ensure I could level. With feet in about 1/4 of the adjustment and the legs at their highest I measured 41 1/2 in (106cm) to the top of the bench. Each leg has 9 grommets for adjustment, two are needed to give the best stability. Each grommet is about 2 inches (5cm) apart. With 2 grommets being used it should allow adjustments between 41 1/2 in down to 27 inches (68.5 cm) with some adjustments allowed by the feet which provide another 2 inches or so. Adjustments are manual and I flipped the table over to adjust. The adjustable part of the legs are held in place by hand adjustable bolts. Took 20 minutes to put together by one person using all manual tools. An allen wrench is provided for the bolts but a phillips screwdriver is needed for the screws. For the adjustable feet, there is a bolt that goes into a grommet in the legs and a nut that can be used to set the depth of the feet. An adjustable wrench or pliers will work to tighten once you get the feet where you want them. Bottom of the table top had some blemishes but the viewable side looked ok.

Easy to assemble. All predrilled holes aligned. Very sturdy. Love that it has an adjustable height. I purchased it for a 3D printer station and found it to be the perfect solution for my needs. I would definitely buy again.

Sturdy, easy to put together, solid wood too

Easy to put together. Husband loves the height adjustment and plug ins. Well worth the price!

Quite surprised at the quality and should be a nice work bench with very sturdy swivel wheels. Warning there is alot of assembly involved which I recommend you really study the direction plctures

Der Tisch macht einen stabilen und soliden Eindruck. Das Produkt ist gut verarbeitet und der Zusammenbau ist einfach. Die gebremsten Räder halten, wenn man die Bremse aktiviert. Ob und in wie weit der Tisch langfristig hält, kann jetzt noch nicht beurteilt werden Der Artikel kommt gut verpackt und pünktlich per DHL.

Produit bien pensé et robuste ! Bonne surprise au déballage. Toutes les pièces sont bien repérées, y compris la visserie. Les roulettes sont de bonne facture et solides. Le plan de montage, bien qu'en anglais, est suffisament clair et explicite. Les glissières prémontées sur les éléments sont aussi de bonne qualité, rendant l"usage du tirroir agréable. Le plan de tavail est prépercé, un jeu d'enfant pour l'assemblage qui nécessite quand même au moins 1 heure de montage. Un petit flou pour le montage du tirroir mais dont les éléments trouvent tout naturellement leur place avec un peu de logique. Une fois monté, il est très stable et solide. Il supporte probablement la charge maximum de 680 kg mais je ne m'y risquerais pas s'il doit y avoir du déplacement latéral avec les roulettes. Personnellement, je vais y rajouter une étagère en dessous et une croix de Saint-André pour rassurer mon septicisme naturel. Mais en l'état, si cet établi n'accueille pas de charges très très lourdes, je le conseille fortement. Il est de belle finition et mérite d'être utilisé ailleur qu'au fond d'un garage. Il pourrait presque être utilisé comme un bureau mais avec une chaise d'atelier plus haute car avec 95 cm de hauteur, ce serait inconfortable... Je suis très satisfait de cet achat.

Zusammenbau nicht durchdacht und für den Preis bessere Qualität erwartet

Perfecte werkbank, hoewel deze erg stevig overkomt (en ook is) ga ik nog wel zelf 2 aluminium strippen kruislings op de achterzijde plaatsen.