Guide Rail Joining Bar Connector, DE6292-XJ | Joining bar for connecting guide rails to extend rail length for longer, continuous cutting applications

Great item. Does what it needs Frustrates that it arrived bent but couldn’t return as needed to use it that day. Otherwise it’s great

These things are essential if you use the rail system. The way the saws work, you need the best part of a 24cm run in and 12cm run out out of the material so that the saw is guided as accurately as possible. That means you need a rail that is about 36cm longer than whatever you are cutting. The largest rail DeWalt makes is 2.6m and with the lead in and out, it will cut about 2.2m. You need this joint and an additional 30cm or so of for 2.4m sheets. I have a 2.6m rail, a 1.5m rail and a 1.5m rail that I cut in two with a mitre saw to make a 1m rail and a 0.5m rail. I am covered for just about everything!! I bought the 2.6m before I realised that it's not long enough for 2.4m sheeting. Another oddity is that you require a 3mm hex key to tighten the adapter up, but one isn't provided. When the bar arrives, first thing you must do is check it is absolutely straight. Because of the way they work, they just aren't going to work if they are even slightly bent. Recommended but expensive for what they are.

Expensive for what it is but it work fine.

Dies what it is supposed to do

Very good company

for what it is its expensive it should come with the guide rails, they do take some time when putting two together to make sure yu have them lined up

Very good

This joiner is not fit for purpose. It's half the thickness as what's needed . I bought the correct joiner now from a reputable builders merchant and the old saying a tight fit is a good fit rings true and the real joiner was alot cheaper . The joiner I ordered will be getting sent back . This will be my first return to amazon.

Imprescindible si quieres unir mas de un carril

fondamentalmente è un barra metallica sagomata, indispensabile per la giuntura delle guide, prezzo un pò elevato

Conforme. Parfait

Einwandfreie Ware und schnelle Lieferung

Het koppelstuk werkt heel matig omdat de maatvoering te smal is. Hierdoor zijn de rails slecht recht aan elkaar te zetten. Van een premium merk als dewalt verwacht je een beter uitgedacht en uitgewerkt concept en product.