[3 Pack Soft Hydrogel Film Screen Protector for iPhone 15 Pro Max/iPhone 15 Plus, Upgraded Non-breakable Flexible TPU for iPhone 15 Pro Max Screen Protector Film (NOT Glass)

So this is the first time I'm trying these. I picked these because I love getting my hands on the latest techs right, but I hate how bulky protectors can almost ruin the experience. The Iphone 15 Pro Max is actually aesthetically very pleasing and a bulky cover or screen protector can rob that from you where I feel it's almost not worth getting it if you had the 13/14 Pro Max. This thing is thin, ohh wow, so thin, it's impossible to perceive on your phone. It just blends so tightly with the screen. So the pros on this for me: - super thin and clear - adds no additional perceiveable weight and definitely no bulk in anyway to your phone -Cannot see the edge without really really trying Between Pros and Cons - The feel is not as slippery, it's not bad but it's not what you're exactly used to and again not too far off, but I'm not too sure yet. I think this is something you can get used to though. - I do see fingerprints on there, nothing too different from tempered glass really, it wipes off easily though. - A couple of scratch tests and it seems fine - Not sure little dings will heal themselves (too early to tell) - It's hydrogel right, so I sense that it may show imperfections if you put it through its paces Cons - I personally had to be patient to remove the bubbles and to put this on. I had to apply it slowly, meaning dust could probably get under the get before it's fully applied - I didn't like that part. It took a bit to muscle out the bubbles. - It's a big tough to remove and since it's so think, be patient because you can actually scratch your screen. I know it's hard to remove because I messed up putting it on where I had to use another one (you get 3 in the box, so that's good). - Putting these on should be seamless I would have loved it more if the application was less painful and it fit perfectly on the phone. The fit is definitely good enough, but it's marginally off center due to how you're putting it. You may get it perfectly, that's a tough one. It sinks and blends in so well onto the phone that even if it's off you can't even tell, so that's how good thin and clean it glues onto your screen. It's a great idea in my mind, amazing, it needs to be perfected though... here's a product someone could adjust and resell on Amazon for all types of phones, maybe I'll look into that... Ok I take a lot of things back... after trying a privacy tempered glass, just for the heck of it (the privacy glass does compromise the screen a bit, you have to touch more precisely and a bit more firmly... didn't like it). I bought another set of 3 and this time I followed the directions and can you believe, NOT ONE SINGLE BUBBLE, NOT ONE... Folks follow the directions. I think I should make a video for this and show people... if the video directions spoke it would have been easier to follow. Quick Written direction 1 - Keep everything in the packages 2 - place phone on its back on the mat in container 3 - Insert plastic holder in USB port with the 3 prongs facing up at the phone screen Make sure you push the plastic holder all the way till flush (Push in tightly, it's tight, but it's fine) 4 - Clean phone screen as clear as possible (I turn the phone off when I do this, makes it easy to see smudges) 5 - remove the hydrogel from small plastic bag Note that there are two sides - Make sure you can read "Paste Start Line" 6 - At the bottom where it says two - Insert in the prongs facing up 7 - Align as neatly as you can (that's not too bad at all) 8 - Once you're happy with alignment - Press everything down where it says Paste Start Line You have not remove the film yet (trust me) 9 - On the top where it says 1. Lift it all the way to the green part. It will show the top separation 11- Separate, as to just break the seal, so you can adhere the gel on the phone 10 - Now with the presser, just press while moving up on the phone screen till the top falls out. 12 - Now go to Number at the bottom, Lift it to remove that bottom film and again with the presser, push it all the way down, till the bottom piece falls out. 13 - Now Press firmly and peal from number 2. Clean, bubble free.... Even better than glass. The first time, I was remove bubbles with a lot of force for 20 minutes till my fingers hurt. This time, I was so shocked. Just follow the directions in the video. If you scan the code for the directions, you will see the quick video. Read my directions and watch the video and you're good... Now I will keep these for a few months and see how they hold... Clarity is prfect and the minimalistic look and feel is just priceless... --Big Fan ... Please note that I don't know anything about this seller or the product in anyway, I just love it, I was looking for something like this for a while. It may not be for everyone, but for me this is a win as I don't like bulky cases that ruin the experience of the phone... nothing is more gorgeous than your new tech toy, putting it in a bubble sucks...

This face cover is amazing because it doesn’t have that hard plastic feeling. It’s a soft realistic feeling to it. Almost like you don’t have a screen protector on. They make the process of putting the protector on that most people can do it. You want to make sure that you get all the air bubbles out before removing the applicator. Because the air bubbles do show up. So follow the instructions for the application process and you shouldn’t have a problem. It fits perfectly and on both the 17 pro and 18 pro because I have used it on both now. I don’t think I will ever go back to normal screen protectors again.

This product SUUUUUCKS! The screen protector started to shrivel, crack and peel off the corners after 6 months. I let it ride for a few more months but just now i tried peeling it off and it is a NIGHTMARE to remove!! It is like they put super glue on the screen and the screen protector starts break off in teeny tiny pieces. I literally have been trying for 30 minutes! I also have to use rubbing alcohol to get the glue residue off. I am so angry i stopped just so i could come and write this review. DO NOT BUY! You will regret it. I hate this company.

These TPU protectors are pretty cool. They are 1/5 the depth of glass, so not shatter, and slightly “self heal” little nicks and fingernail marks. It is softer than a glass screen, but it glides just as easily. There’s no real Friction like some people say, that makes a scrolling noticeable different than a naked screen. You can slightly tell the protector is not glass, but it does not hinder any functions. It does not feel like a cheap plastic sticker on a glass screen. There’s some ever so slight and barely perceptible “cushion” to it. That’s the “healing” layer. It fits will on the phone. With the included application tool, it plugs into your USB C slot to center the sheet you lay over the phone to begin applying. The trick is to spend time at applying the screen. The video says it takes 2 minutes… but spend 10 minutes doing it… make sure to get out ALL bubbles. Don’t be afraid to use the squeegee to get all bubbles out, and go around the lips, so you know it is fully applied and has no air bubbles trapped inside… if you have bubbles and then go around the screen lips to better adhere, you’re trapping the bubbles in the screen. So it’s best to get it right from the start. If the screen has little marks, those should “heal” in a couple hours… but bubbles will make the screen not look good and potentially prematurely cause peeling of the case. But if you spend time on the install, you reap the rewards for a better looking screen, a better scrolling experience, and a longer duration of adhesion. Granted this review is about an hour after install, and things look nearly perfect. Time will tell if this stays on properly. I assume so. If not, it was sub $15, and I typically go without a screen protector anyways (since if you invest in a case with good screen lip coverage, and are careful, that’s the secret to keeping you phone in good shape). Try it. I personally like these. They help fit on a slim iPhone case I have, where a glass screen protector would have extended past the protective raised lips on the screen, so it would not lay flat… so I went with this. The reviews almost made be pass on this purchase, but I think people are just not installing the screens right or taking enough time to ensure the application is bubble free. Take your time installing. Keep at it till there are no bubbles at all. Also, I just do not like the size of weight of glass. It’s either this or no screen protectors for me. For the price and what it is, this screen protector is a unique take and alternative on thick glass protectors… and I like that it won’t shatter… and it’s not as permanent on the screen as a Glass protector which I like. I have seen people ruins screens trying to remove a glass screen protector. This seems to offer the best of both worlds.

Great except for a manufacturing defect on to top of the protector. In the 3 pack, two of the protectors had a wavy segment on the top, with the other one not shown in the photo having the defect further down. I will say, when I went to remove the other protector, it stuck to the screen extremely well. The only one that didn’t have a defect went on my wife’s phone (she lucked out) and the one shown in the photo doesn’t really show normally, only when the light hits it right. The installation was easy and didn’t run into any bubbles I couldn’t remove. I followed the installation video and it worked well. The protector doesn’t reach to the edges of the phone, but having a phone case, that’s a good thing. The case can cause the edges to start peeling up and then the protector is worthless. I decided to go with TPU after years of using glass because I’ve used TPU before but you could feel the ‘stickiness’ on the screen. This one seems to glide well and I won’t have to worry about cracking the protector when my phone falls. Overall, minus the defect, it’s worked out well for me so far

Pros - Relatively easy installation - Impossibly thin. It's difficult to tell you have a screen protector on unless you know what to look for. - Zero impact on screen clarity. - Zero impact on touch sensitivity. One of the (many) downsides of glass screen protectors is that they reduce touch sensitivity due to their thickness. This Hydrogel screen protector does not have this issue. - Scratches self heal. Although the material is slightly soft like rubber, smaller scratches tend to restore themselves over a few minutes to hours. Cons - Soft, rubber-like finish means you can mark the surface with just your fingernail, for example. As noted in the pros though, these type of markings restore themselves completely after a few minutes/hours. - Increased friction when dragging. The rubber-like material means you fingers will catch slightly when dragging slowly and with some pressure. This may be an issue if you do twin-stick type gaming on your phone (I don't). It's not really noticeable for normal use. My first installation with the stickers was perfect, the video guide was very helpful. Immediately after application, I was actually not sure I did it correctly because the screen protector is so thin it's almost imperceptible. I thought I missed a step or something, but in reality my install was flawless. You need to look extremely closely at the edges of the screen to even notice the border. I hate glass screen protectors because they are always made cheaply so they accumulate scratches quickly and tend to crack at the slightest bit of stress. Modern phone screens are very strong, a glass screen protector is not going to protect your phone against the kind of force that would crack the screen. I'm actually way less worried about cracking my phone than I am just scratching it with my keys or coins or dirt and sand. This Hydrogel protector alleviates that stress completely. I genuinely hope companies keep making these so I'm writing a good review because I know it probably makes more economical sense to keep selling those cheapo glass screen protectors that are basically designed to shatter and scratch.

I have always used tempered glass protectors on all my iPhones. But for the 16 Pro Max it’s been difficult to find one that works. The iPhone 16 Pro max has curved edges on the screen similar to the Apple Watch. This causes flat glass protectors to have a rainbow effect on the edges and also to be raised and sharp. This protector prevents both problems, is completely clear and being paper thin, it’s almost impossible to tell it’s there. There are no issues with sensitivity and it’s almost as fingerprint resistant as the naked screen. The only downside about this protector is that the installation is more difficult and time consuming than glass. You have to install it slowly to prevent bubbles. But If I get at least 6 months of durability, it is worth the effort.

Hard to put star number up for a few reasons. Not too upset about it breaking now that I can see it’s not my actual screen that broke and can skip a trip to apple. Yes I forgot it was on there but it is my second one in 9 months. Previous iPhone had tempered glass and whilst in Costco it dropped on its face and the absolute worst annoyance is it stayed intact while the iPhone screen broke to the tune of $50 at apple and less on a diy one here on Amazon so never again will I go with tempered glass. This is all a testament to how tough I am in my phones. Not purposefully mind but have inherited my grandmother, mom, & sister too, drop stuff all the time after a certain age. Infuriating experience especially when trying to be careful with the most expensive iPhone I have owned to date. The best thing I can say is that it seems to not have affected my actual screen but have not removed it for replacement yet. For the very obvious reasons stated above. This is nowhere near fingerprint proof but I usually only clean the screen once in the morning unless having to use it with hands that are also working with any number of meck things (a seemingly endless list of grimy hands making substances). The third in the bundle is on the man’s phone and broke early on and he chose to go without. Since all three failed before nine months had past my hope is the seller will be happy to replace order. Probably will only use them as back up if my search comes up with a better option. The install is easy enough and now even with a pockmark and some big cracks throughout it is still working. Have not felt it be grippy at all and that was a great sounding selling point for the reasons previously mentioned. Guess I’d have to say not very good but not horrible or costly as the glass experience.

Completely different from what is told in description. Very poor quality . Dimensions also different

Muy buen producto

Since iPhone screens are resistant to cracking but prone to scratching, I’ve been trying to find a good film protector. Easy to install, comes with a rubber pad to prevent sliding during installation, and a guide for placing the screen protector. Screen protector fits and feels great, can’t even tell that there is one on. Really hope this company continues to make screen protectors so I can use it on my next phone. Highly recommend.

EDIT*** The line went away. 5/5 stars, can't wait until they launch the 17 pro max because I will be using this kit again for my new phone. I’d love to give this 5 stars because the kit comes with everything you need x3. I love the feel of the screen and I like that it protects my front camera. I usually get the hydrogel screen protectors from the geek squad at Best Buy (iykyk) but didn’t want to shell out the $70 after my 2yo ripped it off. This screen protector is actually less “sticky” than the geek squad one (I can run my fingertip across the screen without it gripping). My complaint: I’m not sure if it was my installation but there is a line straight across the center of my screen where the seam was for the application. It’s tolerable and not worth wasting another screen protector to fix (especially if they’re all like that). But that’s what makes it 4 stars instead of 5. I’m actually going to see if they make an ipad screen protector as well!

I have used many screen protectors before but this one is by far the best one. First off it’s a film not tempered glass. I don’t like glass it always breaks. Now to apply it to your phone it’s so simple and the kit makes sure you have no dust and no air bubbles! I have applied it to two iPhone 14 Pros and both are flawless. Not to mention so far after many days with it on it’s still crystal clear with zero scratches.