Ringke for OnePlus 13 Screen Protector [Dual Easy, 2 Pack]

If you're having issues with the install of this protector, have patience and watch the install video of the protector on the product page. After viewing that video and following along, the installation of this screen protector was smooth and I had minimal air bubbles that dissipated within 24 hours of installation. As a side note, if you're coming from the stock screen protection film, make sure that you remove that film and then immediately place the new protector down on the phone to help minimize any kind of dust contamination. I would suggest also to place the screen protector guide into the usb c port prior to removing the stock film. This protector also has a built in kind of dust remover with the first section of the process. Just remember patience is key with this type of plastic protector.

Terrible. First, they shipped it in the original packaging and put the shipping label over the instructions. *Eye roll* When I finally got to the instructions I followed step 1 and removed tab 1 and half the blue protective layer came off. Instant dirt on the film and no way to put it back together to even attempt install. Second film got all the way on but then there was a tiny piece of film attached to the outside of the installation layers that prevented me from removing the bubbles underneath of it. Attempted to work them out but they wouldn't budge. Of course, they were over the front facing camera so I couldn't leave it on. 2 for 2 down the drain. Don't waste your money. Honestly, they are made of what feels like 4mm plastic film. Don't know how that would protect the phone if something hit the screen but I couldn't use it long enough to find out.

I bought these long ago and they sat unused as I left the factory screen protector on for almost a year. This is my first screen protector that came with an alignment jig. I'm used to carefully aligning an adhesive sheet, then dropping it onto the screen hoping to getting it right. I read the directions and thought I understood the process, but was disappointed. I thought they sent me the folding phone variant because of a horizontal line in the middle, but proceeded to do the install anyway as I had just removed the factory cover and wanted something on the phone until I could order something else. I had huge bubbles and mysteriously had dust trapped where there was none when I started. I reread the directions and realized there was another step I was missing. Watched the online installation video and it all became very clear. 30 seconds later and the screen protector was installed and almost perfect. I'm going to deduct one star for the packaging instructions being unclear and one bubble after the initial install. I'm hoping it goes away in time as the instructions promise. It is located under the #4 tab so I couldn't see it while smoothing the rest of the protector. The screen is crystal clear. Scrolling feels smooth and slippery. Fingerprint reader works as usual. I don't use the selfie camera often, but having the protector over the camera doesn't appear to affect the photo quality. The small cut out in the factory protector was a spot for dust to collect so I appreciate this detail. So overall a really good screen protector that suffers from poor instructions.

Went on semi ok but it was hard to get it aligned and it came off a few days later. There are better screen protectors on Amazon.

Best and easiest protector I have used. Only needed one and was on my OnePlus 13 phone in 2 mins. Used this brand for my OnePlus 12 as well. If you have bubbles they will be gone next day and it does heal on its own. Very good product.

Would e given 0 stars. Directions are completely confusing. Impossible to install with out bubbles. Ruined 1st one because instructions unclear. 2nd one is on there, but many bubbles. Would not recommend. I should've known better and paid more money for a better brand .

Honestly I think people have lost patience, listen it's not the easiest install but it's also not the hardest. You just have to really take your time when apply the screen protector. Also make sure your work area is clean and I even wore some nitrile gloves as an extra precaution. Let the phone sit for the full days and the small bubbles will completely go away and the line you see in the middle of the screen. I've tried the tempered glass for the OnePlus 13 and it just doesn't work due to the curved screen. But this one covers the screen fully and still allows you to text easily and it feels like it can provide your phone screen the needed protection.

First and foremost, my fingerprint reader is still completely 100% functional after installing this screen protector. It feels nice but I can see how it would wear out much much faster than a glass screen protector. Now, this is my first Ringke screen protector, so, even though I read the instructions several times, watching a video is night and day vs trying to read the rediculously tiny print on the back of the box. Once I watched that, it was a pretty straight forward install. Note here: while your box may contain TWO protectors, they have only included ONE wet wipe for cleaning. If you hesitate or take pause when sliding the squeegee tool , you'll have a line in the film. So one fluid sweep up and off the top, and one fluid sweep down and off the bottom should keep things looking clean. The sticker tab for 4 ( the final peel) gets in the way of sliding the squeegee tool when installing the top half of the protector. I'm not sure what the workaround would be for that. All said and done, I think the protector is satisfactory. If anything changes as I use it, I'll make note of it and edit the review.

Before trying this screen protector I tried 4 or 5 other ones. The TPU film ones lifted at the edges, in some cases never even stuck down. One had black borders and impeded on the screen. A UV resin glass one seemed alright at first but then totally ruined the fingerprint recognition. I had just about given up and was psyching myself up to go without a screen protector at all, when someone recommended this one to me. I tried it, fully expecting to have to return it for a refund. I was wrong. This one is excellent. The application process is poor, and I've used many much cheaper screen protectors that have a better application process than this (Take note Ringke). However if you do manage a successful application this screen protector is the best one out there for the Oneplus 13. Most importantly for me, over a couple of weeks now and all the edges are still stuck down perfectly. The protectors feels nice to touch, not too rubbery. Clarity of the screen is not effected either. Unfortunately with this phone and it's ultrasonic fingerprint reader we just need to accept that 3rd party glass screen protectors just aren't an option. This is the next best thing.

Assolutamente NO Una pellicola in gel, che a metterla su ti serve tutta la fortuna dei sette cieli. Nonostante nel primo tentativo era un disastro, nel secondo ha lasciato piccole bolle che in nessun modo si riescono a tirare via. Ma in primis non fornisce nessuna protezione anti urto per il vetro. A parer mio e un NO. Ormai le ho consumate entrambe, quindi non posso neanche fare il reso...

Perfecto para mí oneplus 13, después de probar muchos productos este ajusta perfecto, no sé despegan los bordes y no hace bolsas 10 de 10.

Fantastic and very easy to install.

Oneplus 13ですが、マイクロクアッドカーブディスプレイを採用しており、 四辺全てがR面となっております。 非表示部がカーブしてるだけなら良いですが、Oneplus13は表示部からカーブしています。 エッジディスプレイよりかは緩やかではありますが、 表示面の四辺が全て緩やかなカーブとなっている為、 必然的に保護フィルムの選択肢が狭まります。 硬化フィルム系は全面保護するものは無く、ガラス系もエッジ部は接着剤が無い、等。 こちらの商品はEPU素材なので完璧に全面保護してくれます。 ですが、やはりガラス系と比べたらスクラッチ耐性は弱いので、 定期的な張替えが必要になるかと思います。 曲面ディスプレイの保護フィルム選びは中々難しいです。